Disassembly Guide - Piaggio Porter Rear Driveshaft
Removing the Rear Driveshaft Piaggio Porter
1 - Remove the brake shoes and the brake wheel cylinder.
Here you'll find the complete guides and videos
PIAGGIO PORTER BRAKE SHOE REMOVAL GUIDE
PIAGGIO PORTER BRAKE WHEEL CYLINDER REMOVAL GUIDE
2 - Undo the screw securing the ABS sensor to the driveshaft.
3 - Undo the screws securing the hub to the rear driveshaft

4 - Using the special tool, remove the hub from the rear driveshaft.

5 - Remove the hub complete with bearing and reluctor ring from the driveshaft

6 - Make sure the oil seal shows no signs of wear or irregularities along the sealing edge. Check that the bearing on the rear hub is working correctly.

Looking for Piaggio Porter Rear Driveshaft Parts?

