Removal Guide - Piaggio Porter Rear Leaf Spring


By Christian Sorbello
1 minute read

balestra piaggio porter

Removing the Rear Leaf Spring Piaggio Porter

1 - Raise the vehicle on a lift.

2 - Undo the nuts securing the U-bolt.

balestra piaggio porter

3 - Remove the U-bolt and the bump stop from below.

balestra piaggio porter

4 - Undo the fixing screw of the parking brake cable retaining bracket.

balestra piaggio porter

5 - Undo the front mounting bolt of the leaf spring to the chassis

balestra piaggio porter

6 - Undo the lower fixing nut of the leaf spring pivot bracket to the chassis.

balestra piaggio porter

7 - Undo the upper fixing nut of the leaf spring pivot bracket to the chassis.

balestra piaggio porter

8 - Remove the rear suspension pivot bracket

balestra piaggio porter

9 - Visually inspect the rubber bushes and the bump stop. Replace them if they show cracks, breaks or signs of deterioration. Check that the leaf springs and pivot brackets show no damage, cracks or flattening.

balestra piaggio porter

semiasse piaggio porter