Piaggio Porter Air Conditioning Recharge
Piaggio Porter Air Conditioning System Dehydration and Recharge

Position the vehicle on the lift. Disconnect the negative battery terminal. Observe the prescribed safety rules. Use a suitable dehydration and recharge station.
Run the engine with the air conditioning on for 10 - 15 minutes.
Depending on the vehicle's configuration, remove/move any parts that obstruct the connection of the station's hoses,
to the corresponding recharge valves and those of the air conditioning system.
Unscrew the protective caps (1) on the air conditioning system recharge valves.
Connect the high-pressure coupling hose (HIGH) to the corresponding quick-fit valve. Connect the low-pressure coupling hose (LOW) to the corresponding quick-fit valve. For greater safety, the quick-fit couplings on the equipment's connecting hoses are of different diameters.
Start the refrigerant evacuation procedure, following the instructions in the equipment's user manual.
During evacuation of the system, the compressor oil that is extracted collects in a dedicated container.
The oil is highly hygroscopic: avoid leaving the containers open.
Return to the system the same quantity of oil drained into the container.
- Start the refrigerant recharge procedure, following the instructions in the equipment's user manual.
- Charge the prescribed quantity of refrigerant.
Recommended products
R134a refrigerant gas for the Air Conditioning 0,850 Kg
PAG Oil Iso46 Air Conditioning compressor oil 100 cc
Disconnect the recharge couplings from the air conditioning system hoses. Screw the protective caps back onto the system's recharge valves.
Carry out a test to check that the system works correctly. Connect the negative battery terminal.
Remove the vehicle from the lift.