Piaggio Porter Alternator Belt - Fitting & Removal


By Christian Sorbello
1 minute read

Smontaggio cinghia piaggio porter

Piaggio Porter Auxiliary Belt - Removal.

Loosen the belt adjustment screw, located near the alternator.

cinghia servizi alternatore piaggio porter

After releasing the belt tension, remove it from the three pulleys: (1) Alternator; (2) Crankshaft; (3) Water pump.

smontaggio cinghia pompa acqua alternatore piaggio porter

 

Piaggio Porter Auxiliary Belt - Fitting.

Fit the new belt, making sure to align the 4 grooves of the belt correctly in the pulley.

montaggio cinghia servizi piaggio porter multitech

Adjusting the Piaggio Porter auxiliary belt tension


Tighten the adjustment screw until the deflection of the auxiliary belt reaches the prescribed value.

Carry out the check by pressing on the central part of the belt between the water pump pulley and the alternator pulley, applying a force of 10 Kg.

regolazione cinghia servizi piaggio porter

Piaggio Porter Auxiliary Belt Checks.

- The check consists of a visual inspection of the drive belt. Inspect the belt for any signs of separation of the adhesive rubber on the upper or lower part of the belt, fraying, or cracking in the internal ribs of the belt. Replace the belt if necessary.

- Checking the drive belt tension. Measure the deflection (flex) of the belt by applying the prescribed force at the central point of the belt itself, between the alternator pulley and the water pump pulley.

Technical specifications
Belt deflection:
8÷9 mm applying a force of 10Kg (98N).

cinghia pompa acqua e servizi piaggio porter