Piaggio Porter Brake Fluid Reservoir / Fitting & Removal
Removal Brake Fluid Reservoir Piaggio Porter in 4 Steps
1 - Remove the cover on the dashboard
2 - Empty the brake fluid reservoir by temporarily removing the cap.

3 - Refit the cap and unscrew the fixing screws of the brake fluid reservoir to the dashboard

4 - Slide out the brake fluid reservoir from the underside of the dashboard disconnecting the pipes on the brake servo

Fitting Brake Fluid Reservoir Piaggio Porter
1 - Insert the brake fluid reservoir from the underside of the dashboard and connect the pipes on the brake servo.

2 - Tighten the fixing screws of the brake fluid reservoir on the dashboard.

3 - Fill the brake fluid reservoir with the recommended product.

