Piaggio Porter Door Panel Removal / Fitting
COMPONENTS
1. Inner Door Opening Handle
2. Inner Door Pull Handle
3. Circlip and spacer
4. Window Winder Handle
5. Front Door Trim Panel

Removal
1. Remove the fixing screw of the door opening handle. Remove the inner front door handle.

2. Remove the inner handle by undoing the two screws.
3. Using a cloth, remove the lever circlip and pull out the window winder handle recovering its spacer.

4. Using a suitable tool, remove the trim clips and pull out the door trim panel.

Installation
1. Position the trim panel onto the door, then fit the retaining clips.
2. Fit the door opening handle, tightening its screw.
3. Fit the inner handle, tightening the two screws.

4. Fit the window winder handle complete with spacer and circlip, with the window glass fully closed.
