Piaggio Porter Engine Oil Sump - Fitting
Fit the oil pickup with the delivery pipe on the timing-side crankcase and the support bracket on the cylinder block, tightening it to the prescribed torque.

Apply the prescribed sealant evenly and without interruptions on the mating surface between the oil sump and the crankcase.
Recommended products
Loctite 5699 adhesive sealant.

Fit the oil sump on the cylinder block and tighten the screws and nuts to the prescribed torque, starting from the centre and working towards the sides.
Tightening torques (N*m) Oil sump - Cylinder block 11 Nm

Fit the washer and the threaded drain plug in the lower sump and tighten to the prescribed torque.
Tightening torques (N*m)
Engine oil drain plug - Engine oil sump 25 Nm
