Piaggio Porter Handbrake Adjustment


By Christian Sorbello
1 minute read

Controllo corsa freno di stazionamento Piaggio Porter

Hello Piaggio Porter enthusiasts, in this article we'll show you how to check whether your handbrake is working effectively or not.

Park the Porter on a flat surface.
Put the gearbox lever in neutral. Press down fully on
the brake pedal and hold it. Fully lower
the handbrake.
Slowly pull the handbrake lever
with a force of about 20 kgf (196 N) and
count the clicks. While counting the clicks
and precisely when you feel the handbrake start to work effectively, release the brake pedal.
Make sure the number of clicks is within specification;
adjust it if necessary. Handbrake free play 6 ÷ 10 clicks.

If your handbrake doesn't seem very effective, adjust it again — and if you don't know how, we at Mondo Porter will show you.

Here's how:

First of all, check that the handbrake cables are correctly laid out and secured in their clips under the body shell and in the splitter. To adjust the handbrake travel, press the brake pedal fully down and loosen the adjuster locknut (shown by the arrow in the image below); then turn the nut until the travel is back within specification (i.e. 6/10 of a click); finally retighten the locknut.