Replacing the Piaggio Porter LPG Solenoid Valve Filter


By Christian Sorbello
1 minute read

Filtro Eletrovalvola Gpl Piaggio Porter

Here are the steps to replace the solenoid valve filter on your Piaggio Porter 

Filtro Eletrovalvola Gpl Piaggio Porter

1 - Unscrew the nut on the cover of the solenoid valve filter and remove the brass cup

filtro elettrovalvola piaggio porter gpl

2- Remove the cup filter, in brass, and the magnet.

filtro elettrovalvola gpl piaggio porter

3 - Unscrew the double-threaded fixing screw of the filter, and slide it out of the filter body. Carefully clean all the parts that are not being replaced. Replace the O-rings with the new ones supplied in the parts kit.

Filtro Eletrovalvola Gpl Piaggio Porter

4 - Apply to the end of the double screw threads, on the side facing the solenoid valve, the recommended product.

Filtro Eletrovalvola Gpl Piaggio Porter

5 - Insert the cup into the filter and tighten the nut for the final locking.

Filtro Eletrovalvola Gpl Piaggio Porter

6 - Tighten the double screw and secure the new filter cartridge.

Filtro Eletrovalvola Gpl Piaggio Porter

Tightening torques (N*m)

LPG filter central screw - LPG solenoid valve 4,0

LPG filter cup - LPG solenoid valve 18

LPG solenoid valve union - LPG pressure reducer 16

Filtro Eletrovalvola Gpl Piaggio Porter

FINAL LPG SYSTEM CHECKS

After refitting and tightening all the unions, re-pressurise the circuit and spray the leak-detector spray, making sure that no air bubbles form.