Piaggio Porter Maxxi Differential Removal
Porter Maxxi Differential Removal
Position the rear axle on the dedicated stand so that it can be correctly oriented during the various stages of removal, fitting and adjustment.

remove the oil drain plug and fully drain the differential housing

remove the screws of the differential housing cover and the sealing gasket

mark the reference points on both sides to aid correct refitting of the bearing caps

mark the matching between the differential case and the crown wheel

undo the 8 bolts of the driveshaft and refit 2 of them into the blind threaded holes to extract the driveshaft; repeat the operation on the other side as well.

tighten the 2 bolts until the driveshaft comes out

slide out the driveshaft by hand

extract the differential case.

remove the differential case from the differential housing.

differential case complete with bearings, outer races and ring shims for adjusting the crown wheel and pinion backlash
