Piaggio Porter Multitech Petrol Filter / Fitting & Removal
Fitting Petrol Filter Piaggio Porter Multitech
1- Disconnect the negative battery terminal;

2 - Position the vehicle on the lift

3 - Disconnect the flexible hose by opening the metal clamp

DO NOT SPILL FUEL WHEN REMOVING THE FILTER.
4 - Disconnect the rigid pipe by unscrewing the union

5 - Unscrew the fixing screws of the filter from the chassis and remove it

Fitting the Petrol Filter Piaggio Porter Multitech
1- Position the petrol filter against the chassis and tighten the relevant screws.

Tightening torques (N*m) Fuel filter - Chassis 35,0 ÷ 45,0
2 - Connect the rigid pipe and tighten the union to the specified torque;

Tightening torques (N*m)
Fuel delivery pipe - Fuel filter 40 ± 5 Nm
3 - Connect the flexible hose and close its metal clamp;
Check that the clamp is correctly tightened;

4 - Connect the negative battery terminal
