Replacing the Brake Shoes on the Piaggio Porter NP6
Complete Maintenance Guide to the Brake Shoes of the Piaggio Porter NP6
Maintaining the brake shoes is a fundamental part of ensuring the safety and efficiency of the Piaggio Porter NP6. In this article, we will examine the detailed steps for removing and installing the rear brake shoes, based on the official technical guide.
Removing the Rear Brake Shoes
-
Preparing the Vehicle:
- Position the vehicle on a lift.
- Remove the relevant rear wheel.
-
Removing the Brake Drum:
- Unscrew and remove the brake drum fixing bolts.
- If the drum is seized on the hub, use the fixing bolts, inserting them into the threaded holes to draw the drum off.
-
Removing the Return Springs and Shoes:

- Remove the upper and lower return springs of the brake shoes.
- Remove the axial hold-down clips of the shoes.
- Remove the brake shoes.

-
Removing the Wheel Cylinders:
- Unscrew the connecting union between the brake pipe and the wheel cylinders.
- Unscrew the fixing bolts of the brake wheel cylinder and the piston.
- Remove the wheel cylinders from their seat in the brake backplate.
Installing the Rear Brake Shoes
-
Installing the Wheel Cylinders:
- Insert the brake wheel cylinders into their seat in the brake backplate.
- Insert and tighten the piston fixing bolts.
- Tighten the connecting union between the brake pipe and the wheel cylinders.
-
Fitting the Shoes:
- Insert into their seat the shoes complete with the automatic wear adjuster.
- Insert the axial hold-down clips of the shoes.
- Insert the lower and upper return springs of the brake shoes.
-
Installing the Brake Drum:
- Insert the brake drum.
- Insert and tighten the brake drum fixing bolts.
-
Completing the Installation:
- Refit the rear wheel.
- Remove the vehicle from the lift.
Tips for Effective Maintenance
- Use the Right Equipment: Make sure you have all the tools needed to remove and refit the brake shoes.
- Follow the Prescribed Torque Settings: Use a torque wrench to ensure the bolts are tightened to the correct torque, thereby avoiding damage to the components.
- Check for the Absence of Brake Fluid Leaks: After refitting the brake shoes, carefully check that there are no brake fluid leaks.
- Bleeding the Brakes: Be sure to carry out a thorough bleed of the brake system to remove any air bubbles that could impair braking efficiency.
Conclusion
Maintaining the brake shoes of the Piaggio Porter NP6 is essential to keep the vehicle in optimal condition and ensure safety on the road. By carefully following the steps described in the technical guide, you can carry out this job safely and effectively. Always use genuine, quality components to ensure the best performance from your Piaggio Porter NP6.