Piaggio Porter NP6 Coolant


By Mondo Porter
1 minute read

liquido raffreddamento piaggio porter np6

In this article we look at the type of coolant the Piaggio Porter NP6 uses and how to carry out periodic level checks

 

How to Check the Coolant Level on the Piaggio Porter NP6? 


The coolant level check must be carried out with the engine warm.

Start the engine with the heater control lever set to "hot" and bring it up to operating temperature.

 liquido raffreddamento piaggio porter np6

Turn off the engine, lift the driver's seat and promptly check that the cooling system level is between the LOW (minimum) and FULL (maximum) marks on the expansion tank.

If the level is close to or below the minimum, top up with the recommended coolant until it reaches the maximum

Recommended products

Ready-to-use antifreeze, red. Ethylene glycol-based antifreeze with organic inhibitor additives. Red, ready to use.

ASTM D 3306; ASTM D 4656; ASTM D 4985; CU- NA NC 956-16.

Technical specifications
Cooling system circuit
6,5 (l)
including heating circuit and expansion tank.