Replacing the Crankshaft Pulley on the Piaggio Porter NP6


By Christian Sorbello
2 minute read

Sostituzione della Puleggia dell'Albero Motore del Piaggio Porter NP6 - Mondo Porter

Guide to Replacing the Crankshaft Pulley on the Piaggio Porter NP6

Maintaining the Piaggio Porter NP6 requires care and precision, especially when it comes to the crankshaft pulley. In this article, we'll provide a detailed guide on how to replace the crankshaft pulley, following best practices to ensure an optimal result. This guide is particularly useful for mechanics and DIY enthusiasts who want to keep their Porter NP6 in perfect condition.

Materials Needed

Before you start, make sure you have the following tools and materials to hand:

  • Specific pulley locking tool (Code: 021027Y)
  • Spanners and screwdrivers
  • Piaggio Porter NP6 owner's manual
  • Work gloves and safety glasses

Steps for Replacing the Crankshaft Pulley

  1. Preparation:

    • Park the vehicle on a flat, safe surface.
    • Switch off the engine and let it cool completely before starting any work.
  2. Aligning the Timing Marks:

    • Before proceeding with removal, check that the mark on the pulley lines up with the "0" mark on the timing cover.
    • Make sure the bronzed links of the timing chain are aligned with the marks on the camshaft sprockets.
  3. Removing the Oil Seal Carrier:

    • Remove the fixing bolts of the oil seal carrier.
    • Carefully remove the oil seal carrier.
  4. Locking and Removing the Pulley:

    • Use the specific pulley locking tool to hold it in position.
    • Unscrew the crankshaft pulley fixing bolt.
    • Remove the locking tool and the fixing bolt, then withdraw the pulley.
  5. Fitting the New Pulley:

    • Position the new pulley on the crankshaft, making sure it is correctly aligned.
    • Secure the pulley using the fixing bolt and the locking tool to hold the pulley in position while tightening.
  6. Final Check and Inspection:

    • After fitting the new pulley, check that all components are correctly secured.
    • Refit the oil seal carrier and any other component removed during the process.

You can buy the crankshaft pulley for the Piaggio Porter NP6 here = https://www.mondoporter.com/en/products/puleggia-albero-motore-piaggio-porter-np6