Replacing the LPG Filter on the Piaggio Porter NP6


By Christian Sorbello
2 minute read

Sostituzione del Filtro GPL Piaggio Porter NP6 - Mondo Porter

LPG Parts for the Piaggio Porter NP6: Guide to Replacing the LPG Filter

The Piaggio Porter NP6 is a versatile and popular vehicle, used by many businesses and private owners for a range of applications. Regular maintenance is essential to keep it in perfect condition, especially the LPG system, which needs particular attention.

How to Replace the LPG Filter

Here is a step-by-step guide to replacing the LPG filter on the Piaggio Porter NP6:

  1. Safety first: Make sure you work in a ventilated, spark-free area. Avoid using electrical appliances and do not allow flames or sparks nearby.

  2. Checking for leaks: If you suspect a gas leak, use a leak-detector spray (such as the Effe 91 Gas Leak Detector). Spray the product onto the fittings and pipes: if bubbles appear, tighten the fittings and repeat the check.

  3. Shutting off the gas: Before replacing the filter, close the valve on the tank multivalve.

  4. Discharging the residual gas: Start the engine to use up the residual gas in the system until the vehicle switches automatically to petrol.

  5. Removing the filter: Raise the vehicle and remove the under-engine guard. Disconnect the inlet and outlet pipes from the LPG filter, then loosen the retaining-ring fixing bolt and remove the filter.

  1. Fitting the new filter: Position the new filter, tighten the retaining-ring fixing bolt and reconnect the pipes with their respective retaining clips.

  2. Final checks: Re-pressurise the LPG system and spray the leak-detector spray again to make sure there are no bubbles.

You can buy the LPG Filter for the Piaggio Porter NP6 here = https://www.mondoporter.com/en/products/filtro-gpl-bassa-pressione-piaggio-porter-np6