Piaggio Porter Propshaft - Inspection
Piaggio Porter Propshaft Inspection
1. Check that the propshaft is free of damage and not bent.
2. Check that the spider bearing seat, the sliding shaft and the gaiter are undamaged.
Technical data – Bending limit:
0,5 mm

3. Check the flange yoke and the sleeve yoke.
-
Check that contact surface A of the flange coupled to the differential pinion is not damaged.
-
Check that sliding surface B of the oil seal is not damaged or worn.
-
Check that spline C is not damaged or worn.
-
Fit the sleeve yoke onto the sliding spline of the propshaft. Check that the spline has no play in the direction of rotation and that the sleeve can slide freely in the axial direction of the spline.

4. Check the play of the universal joint.
- Check that the spider has no play in the axial direction E.
- Check that the spider has no play in the perpendicular direction D.
- Check that the spider rotates smoothly.
