Piaggio Porter Propshaft Universal Joint Replacement
Got a Piaggio Porter? Do you go over 50km/h and your steering vibrates??
It's time to replace the propshaft universal joint
Here's a short tutorial on how to replace the propshaft universal joint on your Piaggio Porter. Steps and video.
Here's a procedure to replace the universal joint on your Piaggio Porter propshaft
1 Check the condition
If the universal joint has excessive play, it's time to replace it.

2 Measure the universal joint

Several universal joint sizes are available:
Piaggio Porter 1.3 Petrol universal joint Size Diameter 25 mm you can find it HERE
Piaggio Porter 1.4 Diesel universal joint Size Diameter 27 mm you can find it HERE
Make sure the universal joints you buy always have a nipple (grease fitting) to carry out the greasing procedure

3 Remove the universal joint clips with pliers

4 Often, one of the reasons universal joints wear out quickly is that many of them don't have a grease nipple
( See the universal joint in the photo )

5 Once the worn universal joint is removed, fit the new one with its clips, which you'll find inside the kit.

6 Once the universal joint is properly fitted, don't forget to grease it thoroughly.

Still have questions? Watch the video to see the full procedure