Checking the Piaggio Porter Water Temperature Sensor
Piaggio Porter Water Temperature Sensor.

Functions:
The engine water temperature sensor, detects the engine coolant temperature and controls the operation of the electric cooling fan radiator.
This sensor is an unpowered, dual-circuit resistive sensor, able to provide two characteristic curves: (Curve1) for the engine control unit; and (Curve2) for the instrument cluster.

How to Check whether the sensor is working?
Disconnect the wiring connector from the sensor and use a tester to check for battery voltage (approx. 12,5V).
Check the sensor earthed on the engine water duct, with a tester on pin (1) engine water temperature sensor signal) and pin (3) Negative, verify that the measured values match those of (Curve1) for the engine control unit.
ENGINE WATER TEMPERATURE SENSOR - CURVE No.1 ( TO ENGINE CONTROL UNIT)
The table shows some resistance values of the « engine water temperature sensor» as a function of temperature. Curve No. 1.
TEMPERATURE in (C°) RESISTANCE (Kohm)
|
- 20°C |
13,70 - 16,50 |
|
+ 25° C |
1,82 - 2,15 |
|
+ 80°C |
0,30-0,32 |
|
+110°C |
0,13-0,14 |
With sensor earthed on the engine water duct, tester on pin (2) engine water temperature sensor signal to the instrument cluster, and sensor body (earth): verify that the measured values match those of (Curve2), for the instrument cluster.
With a tester on Pin 2 and Earth (on the sensor body) = read the values of Curve No. 2.
ENGINE WATER TEMPERATURE SENSOR - CURVE No.2 (TO THE INSTRUMENT CLUSTER )
The table shows some resistance values of the « engine water temperature sensor » as a function of temperature. Curve No. 2.
|
+ 64 °C |
79 - 99 |
|
+ 97 °C |
27,2 - 33,0 |
|
+ 115 °C |
16,7 - 20,2 |