Removal Guide - Piaggio Porter Door Panel
Removal - Piaggio Porter Door Panel
1 - Unscrew the fixing screws of the interior handle.
2 - Unscrew the fixing screw of the door opening handle
3 - Release the door-opening rod of the lock from the door opening handle

4 - Using a fork tool, release the retaining split pin from the window winder knob.
5 - Slide out the retaining split pin
6 - Using a suitable tool, detach the trim panel fixing clips from the door

7 - Remove the trim panel of the side door

8 - Remove the water-shield membrane

9 - Clean off any remaining sealant.




