Removal Guide - Piaggio Porter Front Suspension Arm
Removing the Piaggio Porter Front Suspension Arm
1 - Remove the front wheel

2 - Unscrew the bolt and nut securing the lower arm to the wheel hub. Slide the arm, complete with dust cover, downwards
3 - Unscrew the fixing nut, complete with washer, of the arm strut from the strut support.
Slide out the arm strut, paying attention to the presence of the bump stops.
4 - Remove the fixing bolt from the cross member, complete with nut and washer, and slide out the lower suspension arm.
5 - Unscrew the screws securing it to the chassis and the one securing it to the radiator support and remove the strut support




