Disassembly Guide - Piaggio Porter Front Wheel Hub


By Christian Sorbello
1 minute read

mozzo anteriore piaggio porter

Removal Guide - Piaggio Porter Front Wheel Hub 

1 -  Remove the wheel 

mozzo anteriore piaggio porter

2 - Remove the ABS sensor by unscrewing the fixing screw.

mozzo anteriore piaggio porter

3 - Remove the brake caliper assembly by unscrewing the relevant fixing screws.

mozzo anteriore piaggio porter

4 - Unscrew the bolts, complete with washer and nut, and release the wheel hub from the shock absorber

mozzo anteriore piaggio porter

5 - Remove the split pin and unscrew the fixing nut of the wheel hub to the steering arm and slide the latter downwards

mozzo anteriore piaggio porter

6 - Supporting the wheel hub, unscrew the bolt and nut securing it to the lower suspension arm. Remove the wheel hub.

mozzo anteriore piaggio porter

7 - Clamp the wheel hub in a vice. Remove the split pin

mozzo anteriore piaggio porter

8 - Unscrew the castle nut.

mozzo anteriore piaggio porter

9 - Place an aluminium cylinder on the end of the wheel shaft, then strike it with a hammer to drive out the shaft

mozzo anteriore piaggio porter

10 - Remove the flat washer.

mozzo anteriore piaggio porter

11 - Remove the oil seal with its spacer using a suitable lever.

mozzo anteriore piaggio porter

12 - Separate the brake disc by placing an aluminium cylinder on the pin of the wheel hub and striking it with a hammer.
Slide out the central spacer and the bearing.

mozzo anteriore piaggio porter

13 - Turn over the dust shield with the hub and, striking a hammer on an aluminium cylinder placed on the bearing, remove the bearing and the spacer.

mozzo anteriore piaggio porter

14 - Separate the disc from the hub by unscrewing the fixing screws.

mozzo anteriore piaggio porter