Removal Guide - Piaggio Porter Window Regulator 1997-2020


By Christian Sorbello
1 minute read

alzacristallo piaggio porter

Removal Guide - Piaggio Porter Window Regulator 1999 to 2020

1 - Remove the trim panel.
Temporarily using the window regulator knob, position the glass so as to locate the screws fixing it to the window regulator.

alzavetro piaggio porter

2 - Unscrew the fixing screws of the glass from the window regulator 

alzavetro piaggio porter

3 - Manually raise the glass and secure it in place

alzacristallo piaggio porter

 4 - Unscrew the fixing screws of the window regulator from the side door

alzavetro alzacristallo piaggio porter

5 - Slide the window regulator out of the side door.

alzacristallo piaggio porter

6 - Unscrew the upper fixing screw of the front glass channel

alzacristallo sinistro piaggio porter

7 - Unscrew the lower fixing screw of the front glass channel

alzacristallo alzavetro destro piaggio porter

8 - Slide out the front glass channel

staffa alzacristallo piaggio porter

9 - Unscrew the lower fixing screw of the rear glass channel

alzacristallo piaggio porter

10- The upper fixing of the rear glass channel is a push-fit; slide it out from below.
Remove the sealing gaskets

 

alzacristallo piaggio porter

 

alzavetro alzacristallo piaggio porter

alzavetro alzacristallo piaggio porter