Removing the Piaggio Porter Front Shock Absorbers - Guide
Removing the Piaggio Porter Front Shock Absorbers
1 - Raise the vehicle on a lift.
2- Remove the front wheel
2 - Using a flat-blade screwdriver, remove the brake pipe retaining plate.
3 - Unscrew the fixing screw of the brake pipe retaining bracket on the front shock absorber.

4 - Working from inside the cab, unscrew the upper fixing nuts securing the shock absorber to the chassis.
5 - Unscrew the brake pipe union fixing screw from the front brake caliper. Retrieve the copper washers.

6 - Unscrew the lower fixing screws securing the shock absorber to the front wheel hub.
