Replacing the Front Wing on the Piaggio Porter NP6


By Christian Sorbello
2 minute read

Sostituzione del Parafango Anteriore del Piaggio Porter NP6 - Mondo Porter

Complete Guide to Replacing the Front Wing on the Piaggio Porter NP6

If you own a Piaggio Porter NP6, you know how important it is to keep every component of the vehicle in perfect condition. Replacing the front wing is one of those maintenance jobs that can seem complicated, but with the right guide you can do it yourself effectively. In this article, we'll give you a detailed guide to replacing the front wing on your Piaggio Porter NP6, following SEO best practices to ensure the best possible search engine ranking.

Tools Required

  • Vehicle lift
  • Set of spanners
  • Screwdriver
  • Trim removal knife

Removal Procedure for the Front Wing

  1. Vehicle Positioning: Put the vehicle on the lift so you can work safely.
  2. Disconnecting the Battery: Disconnect the battery negative terminal to avoid short circuits.
  3. Removing the Front Grille: Undo and remove the front grille.
  4. Removing the Front Bumper: Pull off the front bumper following the manual's instructions.
  5. Removing the Front Door: Detach the front door to access the wing.
  6. Removing the Windscreen Base Trim: Use a trim removal knife to take off the corner cover of the windscreen base trim.
  7. Undoing the Fixing Screws: Undo the screws securing the front bumper support bracket and remove it.
  8. Removing the Front Wing: Release the indicator bulb holder, undo the wing fixing screws and remove it.

Refitting Procedure for the Front Wing

  1. Positioning the New Wing: Place the new front wing in its location.
  2. Securing the Screws: Tighten the front wing fixing screws.
  3. Repositioning the Bulb Holder: Refit the indicator bulb holder.
  4. Fitting the Bumper Support Bracket: Fit the front bumper support bracket and tighten its screws.
  5. Refitting the Windscreen Base Trim: Secure the corner cover of the windscreen base trim.
  6. Refitting the Front Door, Bumper and Grille: Refit the front door, the front bumper and the front grille.
  7. Reconnecting the Battery: Connect the battery negative terminal.
  8. Removing from the Lift: Remove the vehicle from the lift.

Conclusion

Replacing the front wing on the Piaggio Porter NP6 can seem a complex job, but by following this guide closely you'll be able to carry out the work safely and effectively. Keeping your Porter NP6 in top condition not only improves the look of the vehicle but also ensures its safety and functionality. If you found this guide useful, share it with other Piaggio Porter owners and keep following our blog for more tips and practical guides.

You can buy the wing for the Piaggio Porter NP6 here = https://www.mondoporter.com/en/products/fianchetto-sinistro-piaggio-porter-np6