Replacement & Fitting - Piaggio Porter Brake Pads
Guide Replacement and Fitting - Piaggio Porter Brake Pads
To carry out the steps, place the vehicle on the lift.
Removal - Piaggio Porter Brake Pads
1 - Remove the front wheel; once the wheel is off, remove the clips retaining the brake pads

2 - Slide out the two pins of the brake caliper

3 - Slide out the two brake pads

4 - Check that the pad of the fixed disc is not damaged and that the friction-material thickness is within the specified values. Replace if necessary, or as indicated in the scheduled maintenance table.

Technical specifications
Minimum thickness of the wear material brake pad
1 mm
Fitting the Piaggio Porter Brake Pads
1 - Insert the brake pads into their seats

2 - Insert the pins, aligning the holes

