Replacing the Rear Bumper on the Piaggio Porter NP6


By Christian Sorbello
2 minute read

Sostituzione del Paraurti Posteriore del Piaggio Porter NP6 - Mondo Porter

Complete Guide to Replacing the Rear Bumper on the Piaggio Porter NP6

The rear bumper on your Piaggio Porter NP6 is an essential component for both the safety and the appearance of the vehicle. In this article, we'll guide you through the process of removing and refitting the rear bumper, making sure your vehicle is always in perfect condition. Follow this step-by-step guide for effective and safe maintenance.

Tools Required

  • Vehicle lift
  • Screwdriver
  • Set of spanners
  • New rear bumper
  • Battery negative terminal

Removal Procedure for the Rear Bumper

  1. Vehicle Positioning: Position the vehicle on the lift so you can work safely and comfortably.
  2. Disconnecting the Battery: Disconnect the battery negative terminal to avoid short circuits while working.
  3. Removing the Rear Light Clusters: Remove both rear light clusters to access the bumper fixing screws.
  4. Disconnecting the Number Plate Light Unit: Disconnect the electrical connection of the number plate light unit and release the wiring from the cross member.
  5. Undoing the Fixing Screws: Undo the fixing screws of the rear bumper using the screwdriver or a suitable spanner.
  6. Removing the Bumper: Carefully remove the rear bumper from the vehicle.

Refitting Procedure for the Rear Bumper

  1. Fitting the Number Plate Light Unit: If removed, fit the number plate light unit on the bench and tighten the fixing screws.
  2. Positioning the Rear Bumper: Position the new rear bumper in place.
  3. Tightening the Fixing Screws: Tighten the fixing screws of the rear bumper to the specified torque of 40-45 Nm.
  4. Reconnecting the Number Plate Light Unit: Connect the electrical connection of the number plate light unit and release the wiring from the cross member.
  5. Refitting the Rear Light Clusters: Fit both rear light clusters.
  6. Reconnecting the Battery: Connect the battery negative terminal.
  7. Removing from the Lift: Remove the vehicle from the lift.

Conclusion

Replacing the rear bumper on the Piaggio Porter NP6 is a job that calls for precision and care, but by following this guide closely you'll be able to carry it out successfully. Keeping your vehicle in top condition not only improves its appearance but also ensures greater safety on the road. If you found this guide useful, share it with other Piaggio Porter owners and keep following our blog for more tips and practical maintenance guides for your vehicle.

You can buy the Rear Bumper for the Piaggio Porter NP6 here = https://www.mondoporter.com/en/products/paraurti-posteriore-piaggio-porter-np6-1