Valve Timing - Belt Refitting Piaggio Porter 1.3 16V


By Christian Sorbello
2 minute read

Fasatura distribuzione - Rimontaggio Cinghia Piaggio Porter 1.3 16V

Valve timing Piaggio Porter 1.3 Petrol 16-valve Daihatsu HC  

 1. Temporarily fit the cylinder head cover.

distribuzione piaggio porter daohatsu

2. Position the camshaft pulley with reference mark B aligned with the mating face between the cylinder head and the cover.

3. Align reference mark C on the crankshaft pulley with indicator D cast into the oil pump.

4. Fit the belt so that the two coloured marks are aligned with the respective reference marks on the pulleys.

5. Slacken the tensioner locking bolt.
Apply tension to the belt. Temporarily tighten the screws

distribuzione piaggio porter

 

6. Turn the crankshaft 3 ÷ 4 times in the normal direction of rotation.
After aligning the cinghia, continue in the direction of rotation until the letter "F" on the pulley sits three teeth before the mark on the cylinder head cover.

 cinghia distribuzione piaggio porter

7. Slacken the tensioner locking screw.

distribuzione piaggio porter

 

8. Turn the crankshaft further in the normal direction until reference mark "F" on the camshaft aligns with the indicator (notch) on the cylinder head cover.

distribuzione piaggio porter

9. Tighten the locking screw of the belt tensioner to the specified torque value.

 

distribuzione piaggio porter 

Tightening torques (N*m)
Tensioner timing belt 29÷44

10. Make sure the reference marks on the crankshaft pulley, as well as those on the albero a camme, are aligned with the corresponding indicators.
If a mark is not aligned with its indicator, repeat the operations from step 2. onwards.

 

cinghia distribuzione piaggio porter

KEY:
A: Mark on cylinder head cover
B: Mark on timing pulley
C: Mark on crankshaft pulley
D: Casting mark on pompa olio
F: "F" mark on the outer side of the timing pulley