Piaggio Porter Transmission Shaft Cross Replacement
Do you have a Piaggio Porter? Do you go over 50km/h and does your steering vibrate ??
It's time to replace the drive shaft spider
Here is a small tutorial on how to replace the drive shaft cross of your Piaggio Porter. Procedures - Videos .
Here is a procedure to replace the drive shaft cross of your Piaggio Porter
1 Check the Status
If the spider has excessive play , it is time to replace it .
2 Meter Cruise
There are different sizes of cruises:
Cruiser of the Piaggio Porter 1.3 Petrol Measurement Diameter 25 mm can be found HERE
Cruiser Del Piaggio Porter 1.4 Diesel Measurement Diameter 27 mm can be found HERE
Make sure that the spiders you buy always have an inlet (head) to carry out the greasing procedure
3 Remove the spider locks with pliers
4 Often One of the reasons why the spiders wear out quickly is due to the fact that many do not have a greasing head
( See cruise in photo )
5 Once the worn Spider has been removed, insert the New one with its relative Fasteners, which we will find inside the kit.
6 Once the cruise is installed properly, don't forget to grease it properly.
If You Still Have Doubts - Watch The Video To See The Complete Procedure