Replacement and Assembly - Piaggio Porter Front Brake Caliper
Piaggio Porter Front Brake Caliper Replacement and Assembly Guide
Place the vehicle on the lift. Properly remove the front wheel.
Removal - Piaggio Porter Front Brake Caliper
1 - Obtain a container suitable for collecting brake fluid and unscrew the fastening screw of the front brake hose (1).
2 - Unscrew the fixing screws of the front brake calliper on the wheel hub (2) and remove the front brake calliper.
Installation - Piaggio Porter Front Brake Caliper
1 - Tighten the fixing screws of the front brake calliper on the wheel hub (1).
2 - Tighten the screw fixing the front brake hose to the front brake calliper (2). Fill and bleed the brake system.