olio cambio piaggio porter

In this article we will show you how to replace the gearbox oil in 4 simple steps and in a short time.

  1. First drain the oil by removing the drain and filler plug.
  2. Insert the drain plug again. (We always recommend inserting a new gasket)
  3. Fill in the new oil until it runs out of the filler hole
  4. Close the filler cap by inserting a new gasket.

(We recommend the following products " AGIP ROTRA MP 80W-90 Extreme Pressure Gear Oil "; SAE 80W-90 ; API GL-5 ).

Finally, we advise you to check for any oil leaks and to check the gearbox oil level which must reach the inspection hole or be less than 5 mm.

ManutenzioneOlio cambioPiaggio porter 1.3 benzina

Your text

You can use this text to write about your brand.